Pressure regulator OmniReg
Pressure regulator OmniReg
Pressure regulators are valves that automatically cut off the flow of water at a certain pressure. The pressure regulator model is used where there are low flow and low pressure requirements and the incoming supply pressure is variable. Ideal for use with drip irrigation systems.
- Pressure Regulator
-
It is suitable for all Irritrol valves: Century Plus, 700 series (Ultra Flow), Euro F PR 1”, 200-B and S-Series
-
Body in Nylon reinforced with fiberglass, metal components made of steel and brass
-
The desired pressure can be adjusted when the system is shutdown or in operation
-
Outlet pressure regulated from 0,35 to 2,1 bar (mod.OMR-30) and from 0,35 to 6,9 bar (mod. OMR-100)
-
Flow rate from 3,8 to 1136 l/min.
-
Accuracy of ±0,2 bar
-
Pressure regulator OMNIREG's inlet pressure has to be at least 0,7 bar higher than the desired outlet pressure
To reduce water hammering, the flow rate must not exceed 2,3 m/sec
Downstream sensing kit available for a higher precision in low pressure conditions.
No need for a gauge because the central selector indicates the outlet pressure both in psi and bars
Easy vertical installation in the solenoid cavity, using the two screws provided. The solenoid is fitted in the side cavity provided in the OMNIREG.
Its upright position facilitates assembly, offering a great saving in space and makes it extremely easy to adjust
Pressure regulator OmniReg eliminates the need to keep double valve stocks
Needs only 3,8 l/min to operate
Schrader coupling to enable pressure controls (if desired)
Inlet pressure up to 13,8 bar
Constant downstream pressure is maintained by OMNIREG pressure regulator.
Products
Pressure regulator OmniReg 0.35 - 2.1 BAR
Article № OMR-30
Minimum quantity for order 1
Pressure regulator OmniReg 0.35 - 6.9 BAR
Article № OMR-100
Minimum quantity for order 1
Downstream sensing kit OmniReg
Article № OMR-DS
Minimum quantity for order 1
Minimum quantity for order