Drip In PC Pressure compensating
Brand

Irritrol USA

Drip In PC Pressure compensating

Drip In PC Pressure compensating

Ideal to irrigate crops in difficult topographical conditions, varying water pressures and in installations requiring long laterals.

Drip In PC (pressure compensating) dripline has a built in flow regulated emitter that provides a constant discharge over a pressure range of 0,5 bar to 4,2 bar. The emitter is installed in the tube during the extrusion process. This prevents damage and loss of dripper and reduces labour and installation costs.

Characterizations
  • Highly resistant to clogging (filtration is, in any case, required)
  • The flow rates never exceeds nominal flow rate
  • Drip In PC is the only dripline featuring dual-opposed exit holes to prevent re-entry of dirty during vacuum phase at the end of each irrigation cycle
  • Drip In PC emitter body is made from polyethylene resins. The diaphragm is made from silicon. This combination will withstand acids down to pH2 as well as chemicals, fertilisers and chlorine
  • The emitters performance is not affected by changes in water temperatures
  • Five years’ warranty
Technical information
Drip In PC is highly versatile
Emitters are available with 5 different flow rates (1,8-2,0-2,4-3,0-4,0 l/h) and can be inserted into two hose sizes:
  • 16 mm (I.D. 14 mm / O.D. 16,2 mm)
  • 20 mm (I.D. 18 mm / O.D. 20,4 mm)
Unlimited spacing options plus group spacing provide greater design flexibility
Drip In PC can be used in permanent installation or row crops where it is laid out and re-rolled easily
Standard reel-length:
  • 300 m per 20 mm
  • 400 m per 16 mm
Drip In PC may be hung on wire, laid on the surface or buried (SSDI).
Products

PC dripline for lanscaping

Drip irrigation for landscaping

Attached files

Minimum quantity for order